The Addiction Continues

[The Nutty Professor]

Well no photo's of the damage I already have a heli-coil slapped in that baby. I'm pretty sure it's good to go :bananar:

[The Nutty Professor]

would you be interested in making another set of those brackets for the rear sets?

Brah I didn't make those rear sets :grind: I bought them from Rene when he was on here regular and trying to start up his biz :bling2:

[boogerboy722]

nah just the adapter brackets. it looks like its just four holes to drill/tap?

[The Nutty Professor]

That's a no can do on the brackets. Not because I don't want to make them but each one had to be matched to that side of the bike. The holes are not lined up right or at least on my frame they weren't. If I made them they probably wouldn't fit. On top of that I'm out of the aluminum stock I used. I found that stuff dumpster diving and haven't looked around here to see who sells it? I really need to stock up on more just in-case The Nutt gets a wild idea.

[boogerboy722]

word, i understand.

was it just two holes that held the brackets to the frame, and two more for the new rearsets?

[The Nutty Professor]

Yes. Drilled four holes and tapped them. I used SAE bolts they have a deeper thread and will hold the aluminum better.

[Blitz$M.Inc.$]

SAE = south asian equivelent?

[The Nutty Professor]

I don't know if this will work but I'm going to try it. I can't see where the oil leak is and it only leaks when the motor is running. Meaning when there's pressure in the crank case. I'm going to plug up everything I can and apply air from a compressor and see if I can find the leak. Yeah I know there's not oil flow but maybe just maybe I don't need it to find the leak. I taken the motor out and taken it apart and put it back together using different gasket sealer in different places. Let's see if I plugged the leak :dunno:

[Blitz$M.Inc.$]

interesting idea
at work we simply do a steam clean to find oil leaks
we also have a smoke machine that will blow through an exhaust system to find leaks
your gonna need to roll the motor to tdc, plug the intake and exhaust, spark plug in and blow through the case vent

[btroxl]

I know on a 2stroke to check for bad crank seals you Clean the motor well an then put baby powder all over it, run it an look for the wet spots. maybe this would work for you??

[The Nutty Professor]

Air coming out of a tappet cover? There's that much pressure in there huh! I realize they have head vents but damn!

[swheels]

One thing i found out real quick, these valves caps will leak if you take them off couple of times.I just use a little gasket maker,oh plus you gotta tighten them down in increments as the bolt gets snug.

[Blitz$M.Inc.$]

somebody rolleye0010 needs to make a 'how to take apart the yx motors' thread, properly that is, specs and all, lash whatever

[The Nutty Professor]

As much as I keep screwing up hell I should have done it by now. With my memory I need too. I have to keep going back and finding pieces of info in threads to make sure I did whatever right rolleye0010 because there sure ain't no Chilton or Haynes for these little puppies.

The motors back together and in the bike. I think I plugged all the leaks or whatever the hell it was? And I can see this motor really needs a head vent the pressure build up in there has to be off the chain now with the V2 head on it. I haven't done it yet because I was reading a article on a Yamaha 650 site about vacuum assisted case and head venting and it's fairly easy to do I just want to have all the stuff on hand so it goes quick and easy ("Easy" a famous last word for The Nutt).

[swheels]

As much as I keep screwing up hell I should have done it by now. With my memory I need too. I have to keep going back and finding pieces of info in threads to make sure I did whatever right rolleye0010 because there sure ain't no Chilton or Haynes for these little puppies.

The motors back together and in the bike. I think I plugged all the leaks or whatever the hell it was? And I can see this motor really needs a head vent the pressure build up in there has to be off the chain now with the V2 head on it. I haven't done it yet because I was reading a article on a Yamaha 650 site about vacuum assisted case and head venting and it's fairly easy to do I just want to have all the stuff on hand so it goes quick and easy ("Easy" a famous last word for The Nutt). Uh i don't know man.......I think you need to just get running and worry about all that fancy stuff later.thinking_smilie

[The Nutty Professor]

Oh that is for later. Way later. I was just up and rambling.

[shaq93]

on one of your high compression motor, how many kicks does it take to start

[The Nutty Professor]

On "S" bike I've seen him start on one or two. Mine...when the hell it feels like it. Never one kick though. More like 15--20 Nutty-Rant I have to tard the timing I know that it smacked me in the back of the leg so hard I was limping for an hour.

[Monster_Bike1780]

On "S" bike I've seen him start on one or two. Mine...when the hell it feels like it. Never one kick though. More like 15--20 Nutty-Rant I have to tard the timing I know that it smacked me in the back of the leg so hard I was lipping for an hour.

i get mine in about 2 to 4 kicks

[Blitz$M.Inc.$]

DUDE! im so stoked, the 160 has started the last three times on the first kick!
the 150 never wanted to start for me Nutty-Rant, lucky butt
my 146 with the zong head started the first kick for like 3 months, no bs
i know those arent real hi comp motors but still
it will take a few kicks for a high comp motor

[shaq93]

i was asking cause it looked like brian had a hard time starting that 160

[Monster_Bike1780]

i was asking cause it looked like brian had a hard time starting that 160

you just gotta catch it on the compression stroke, and roll on the throttle, thats what i do:yup:, but the carb has a small leak that is in the front of the carb, idk where it is, but its nothing huge

[shaq93]

you just gotta catch it on the compression stroke, and roll on the throttle, thats what i do:yup:, but the carb has a small leak that is in the front of the carb, idk where it is, but its nothing huge

dang, someone told me not to roll on the throttle. im getting all the wrong info

[Blitz$M.Inc.$]

i had sucess with rolling on the throttle with the 150 too
i think its a carb thing too

[Monster_Bike1780]

dang, someone told me not to roll on the throttle. im getting all the wrong info

um yea they def giving sum bull sheet info, becuz these motors run like crap until they are warmed up, the motors have a certain temp they need to reach, i know me and swheels is like 176 degrees, but im not sure.

[shaq93]

he was telling me not to roll on the throttle while you are kicking over the bike

[Blitz$M.Inc.$]

he was telling me not to roll on the throttle while you are kicking over the bike

he could be right for that particular motor
i never had to do that with my 146 or 160
but hey when your desprate to start the motor you will start trying everything lol

[Monster_Bike1780]

he could be right for that particular motor
i never had to do that with my 146 or 160
but hey when your desprate to start the motor you will start trying everything lol

very true, i do not touch the throttle till the motor comes to life, if i dont the bike dies

[Blitz$M.Inc.$]

i never bothered tuning that carb
try turning the air/fuel screw counterclockwise a half turn, that regulates idle to 1/4 throttle, i might have it backwards

[Monster_Bike1780]

i never bothered tuning that carb
try turning the air/fuel screw counterclockwise a half turn, that regulates idle to 1/4 throttle, i might have it backwards

after the motor warms up, it will sit there and idle

[TRT]

you just gotta catch it on the compression stroke, and roll on the throttle, thats what i do:yup:, but the carb has a small leak that is in the front of the carb, idk where it is, but its nothing huge

dude rolling the throttle is what causes that dredded kick back that breaks cases and calves.......

The easiest way to start these is to turn up the idle a little and put on the choke and kick without touching the throttle.... heck if you want even hold the kill button in for 2 kicks just to get some gas in there b4 kicking it to start.... Trust me I know... Just try it once like this then give us your opinion.... It is a little bit of a pain turning up the idle every time you start it cold but its better than repalcing cases.....banghead

[Blitz$M.Inc.$]

7 motors-0 broke cases
just sayin
whatever works

[Monster_Bike1780]

7 motors-0 broke cases
just sayin
whatever works

when i kick i dont let the kickstart come flying back up i keep my foot on top of it, and bring it back up as it comes up

[The Nutty Professor]

When you're to far advanced and the motor kicks back there's no keeping your foot on the kickstart. It will damn near flip you off the bike. Well at least knock you off balance.

[swheels]

When you're to far advanced and the motor kicks back there's no keeping your foot on the kickstart. It will damn near flip you off the bike. Well at least knock you off balance.Still better than having cracked cases on a tight budget.bluelaugh:yup:

[The Nutty Professor]

Oh I agree big time "S" I was just saying sometimes hanging on is all ya got bluelaugh Got the bike started today and I had no leakage :bananar: Can't hit my spot until Saturday or Sunday. But I'm going to check to see if schools still in on Friday if not I running to the house and packing up my stuff and ride hopefully both bikes. There's a large area dug up next to where the road is so I can off-road too. The only problem....If I wreck they won't find me til Monday :stretcher: HAHAHAHA!!!!! I'm going to try and video a little bit just prove the Nutt ain't scammin'. Got the tripod but don't know if the camera (Still with video) can get the job done.

[swheels]

Oh I agree big time "S" I was just saying sometimes hanging on is all ya got bluelaugh Got the bike started today and I had no leakage :bananar: Can't hit my spot until Saturday or Sunday. But I'm going to check to see if schools still in on Friday if not I running to the house and packing up my stuff and ride hopefully both bikes. There's a large area dug up next to where the road is so I can off-road too. The only problem....If I wreck they won't find me til Monday :stretcher: HAHAHAHA!!!!! I'm going to try and video a little bit just prove the Nutt ain't scammin'. Got the tripod but don't know if the camera (Still with video) can get the job done.Hows the motor rev'in? is t getting up in the rpm's? Heck with that even if she's sputtering and spittin.You need to get some mileage on them tires.:clap:

[The Nutty Professor]

It's taking throttle on the stand but it remains to be seen what happens on the road. I really don't care I'll ride it and fiddle with it til it's decent if it isn't already and go from there.

[swheels]

It's taking throttle on the stand but it remains to be seen what happens on the road. I really don't care I'll ride it and fiddle with it til it's decent if it isn't already and go from there.From what your saying it sounds like it's doing better than it did at Dublin.thumbsup2

[The Nutty Professor]

It's running like it did in the X22 at Elgin but sounds and feels a hell of a lot stronger :biggrin:

[Monster_Bike1780]

It's running like it did in the X22 at Elgin but sounds and feels a hell of a lot stronger :biggrin:

thats good man, maybe you might be there in dublin this year, i wanna go again, and try to uphold the title

[swheels]

It's running like it did in the X22 at Elgin but sounds and feels a hell of a lot stronger :biggrin:Then that means she runner! She ran at Elgin so it's all good!thumbsup2

[Blitz$M.Inc.$]

nutty, great to hear, youve been doin the dew
monster, i got 2 bux that says no trophy for you this year moon1, unless we all crash bluelaugh gl tho
man i wanna live at the herrins, wake up, drink some coffee and go do laps...ahh the life

[The Nutty Professor]

Blitz that's just dirty! Now you've got me cornered. When I get cornered I come out WTFO which means....I'll crash trying to pass, stay ahead, or catch up.

[Monster_Bike1780]

nutty, great to hear, youve been doin the dew
monster, i got 2 bux that says no trophy for you this year moon1, unless we all crash bluelaugh gl tho
man i wanna live at the herrins, wake up, drink some coffee and go do laps...ahh the life

idk blitz, i will be pushing and giving it all i got, maybe by then i might sum more parts :biggrin:

[swheels]

Blitz that's just dirty! Now you've got me cornered. When I get cornered I come out WTFO which means....I'll crash trying to pass, stay ahead, or catch up.Man that's your home track. I i lived that close my laptimes would be INSANE! I'd sit all during practice then when it's time to race.I'd show how much time i spent at that track by throwing down some fast laptimes.:bananar: I'd be there to the point the Herrins would offer me a job!LOL

[Blitz$M.Inc.$]

ok then, best crash wins!

[swheels]

You what Blitz your right! Reid you wont be in the lonely only 110cc class.Chief you'll be racing with the big boyz for now on!bluelaughbluelaugh

I can only imagine everybody will be coming with there A++++ game.thumbsup2

[Monster_Bike1780]

You what Blitz your right! Reid you wont be in the lonely only 110cc class.Chief you'll be racing with the big boyz for now on!bluelaughbluelaugh

I can only imagine everybody will be coming with there A++++ game.thumbsup2

heck yea man, im ready son, im readythumbsup2

[Blitz$M.Inc.$]

heck yea man, im ready son, im readythumbsup2

you mean pops moon1

[The Nutty Professor]

I've spent two days working on a linkage for the rear suspension. I made the parts out of heavy plastic so I could make templates quickly until I got it right...I'm not satisfied. I'm obviously not getting the same results as "S"? I can see the potential but I'm not getting the geometry done as quick? Back to the basic setup and get the motor up and "NOT FRIGGIN LEAKING!"

I really didn't feel like fighting with getting the motor out again that's why I worked on the suspension. I'm seriously thinking about sending my motor and carb off to one of the Pit Bike engine builders and letting them sort it out and send it back. I'm obviously to damn stupid to get it right?

[The Nutty Professor]

I'm so hacked off now I'm tearing it apart again and putting it back together. I really need to get a stock X19 gas tank so I can move the tank lower and get things arranged like they should be?

[boogerboy722]

i got a spare, you dont have any x6 calipers laying around do you?

[The Nutty Professor]

I believe I only have X18 calipers? Although I might have one X6 I'm not sure. I'll have to look at a X6 and compare it to what I have.

[The Nutty Professor]

Can't bring myself to go out into the garage. It's friggin hot! I even have a A/C out there...still too hot!

[Blitz$M.Inc.$]

ya old people dont like to get hot huh
now imagine yourself out there in full leather

[swheels]

Blitz my man i'll take full leathers any day of the week.When you can just stand in my garage in shorts and a tank top.Then sweat like you've been running somewhere even though all you did was wlk into the garage.Full leathers on race day doesn't seem so bad.LOL Atleast you might get a breeze every now and then.Even with the window open and fan blowing it does no good.
So now i resort to working in the garage at night till th weee hours in the morning on the weekends.Or if i really need something done,i'll do work in the garage in the morning when i get off from work.thumbsup2

[The Nutty Professor]

When I'm on the bike and riding in full leathers I don't feel the heat. When I stop way different story. But in the garage I can't/don't think well when I'm friggin hot!

[Monster_Bike1780]

Gettin hot and sweaty is the beauty of working on a bike in the middle of the summer XD, im jk. I hate it too, but i got my tap and die set, imma fix that header bolt

[The Nutty Professor]

Hot or not I had to get the damn motor out and "S" just a quick look I think you're right about the tappet cover banghead I think I'll just use gasket material and 1211 gasket :dunno:


So I decided to use a little time before work and add the bottom part of the rear suspension linkage. The dog-bone I think is about an inch to long and the linkage is also about an inch to long. That's why I did everything in plastic. I can made a bunch of pieces quickly until I get it right.
http://i189.photobucket.com/albums/z216/NuttyProfessorPS/Linkage0014.jpg
http://i189.photobucket.com/albums/z216/NuttyProfessorPS/Linkage0013.jpg
http://i189.photobucket.com/albums/z216/NuttyProfessorPS/Linkage0012.jpg
http://i189.photobucket.com/albums/z216/NuttyProfessorPS/Linkage0011.jpg

[swheels]

NOOOO don't use the paper gasket material.Just some good Rv gasket maker should do the job.

From the 1 pic( your link to the others wouldn't allow access) It look like it's letting the swingarm drop down to much????I'll take some better pics of the one i did on my bike.I'll through in a tape measure too. But it looks good though and the overall should go smoothly.

[boogerboy722]

go to vato zone, look for "grey ridgid drying silicone" by permatex. i swear you could put a motor together with just this stuff, its gud.

[The Nutty Professor]

I fixed the links they all work now rolleye0010 ok I can be hamfisted sometimes I just stumble along like everyone else on the net bluelaugh

[swheels]

Ok from looking now it definitly looks like the tri peice is to big.You can try to salvage it though by moving the lower shock mount hole back alittle.Maybe by 5mm then see what you get. I've got to make some spacers and bushing.So since i got to take the linkage apart again i'll make up some templates.

[The Nutty Professor]

I recut the linkage and shortened the dogbone and cut out the final pieces in aluminum and steel and put her together. The spring on there is the 450lbs that came with it and damn it's stiff! No more 1500lbs spring which I know was put tension on parts not designed for that stiff a working part. I also dumped the heavy heavy clipons I had for a set of race bike take-offs. I think they're Vortex :dunno: all I know is they're nice as hell!

http://i189.photobucket.com/albums/z216/NuttyProfessorPS/June1220101.jpg

http://i189.photobucket.com/albums/z216/NuttyProfessorPS/June1220102.jpg

http://i189.photobucket.com/albums/z216/NuttyProfessorPS/June12201021.jpg

http://i189.photobucket.com/albums/z216/NuttyProfessorPS/June12201022.jpg

http://i189.photobucket.com/albums/z216/NuttyProfessorPS/June1220103.jpg

http://i189.photobucket.com/albums/z216/NuttyProfessorPS/June1220104.jpg

[swheels]

Nice see that cake huh.... I knew you could do it! Now i have to make a suggestion, see that single dogbone.Now make another and use the both of them together.I say this because just that single mounte like that will take alot of wear and tear or snap the bolt/bend them.thumbsup2:clap:
BIIIIIG DIFFERENCE right.LOLOLOLOL

[The Nutty Professor]

Ah didn't think about that! I have the other half of what I was using. I'll make a duplicate and run them with a bushing spacer between them. I thought about coping a 1:1 bike but that's a little harder and more work than this set up and they work exactly the same.

[The Nutty Professor]

If you leave a dowel pin out of the topend it will spit oil out like a bad oil spill in the gulf! Just sayin! If I'd get my head out of my backside I would had been riding long ago.

[Blitz$M.Inc.$]

the best lessons are often learned the hard way

[The Nutty Professor]

Yes Blitz and I'm tired of learning the hard way. I going back to the darkside I think. I'm tired of dealing with 4 stroke motors and their crap. I'm looking for a 2 stroke for my X15 as I type this. I believe in Mids but the motors are giving me to much to cuss about. I know most people are moving from 2 stroke to 4. I've always bucked the trends so I'll walk against the tide on this one.

[Road_Clam]

Yes Blitz and I'm tired of learning the hard way. I going back to the darkside I think. I'm tired of dealing with 4 stroke motors and their crap. I'm looking for a 2 stroke for my X15 as I type this. I believe in Mids but the motors are giving me to much to cuss about. I know most people are moving from 2 stroke to 4. I've always bucked the trends so I'll walk against the tide on this one.

After a year or so of becoming so aggravated over parts that "don't fit" or "can't fit" I will probably give up on horizontal 4s's as well. I'm generally far more comfortable with 2s. My ultimate game on is to shoehorn my spare shifter kart CR125 engine into my X18 !rock2 But that is a journey later on after I gain more experience....

[Blitz$M.Inc.$]

clam, here is a 100cc in a x18

[Road_Clam]

clam, here is a 100cc in a x18

That is SWEET ! Tight fit with the expansion chamber between the frame huh ? AWESOME job !

[Blitz$M.Inc.$]

it is xmr's bike, just showing you the possible routes

[The Nutty Professor]

I'm looking for a yz85. It should fit in a X15 frame a little better.

[NaSa]

Half the strokes per cycle = twice the POWER strokes per Revolution. thumbsup2 twocents

ps

Awesome thread!

[Blitz$M.Inc.$]

i think ill keep my 4T in the mid
since ive been riding the pb im getting used to the 2T ride, and i dont think id like it on a bigger machine, then again a gearbox and clutch might change my mind
and wow i thought the irk was low drag, the pbs are no drag, i like a little drag

[The Nutty Professor]

I just got so tired of messing around with my YX150 but I'm at it again. Funds won't allow me to continue the RM 125 for right now so I pulled the X15 apart and I'm working on it yet again. I wanted to put the X12 body on there but that won't work without major cuts I'm not willing to make so I will put it on another frame I will cut. Yes another frame. Yes another bike.

[rene13]

I just got so tired of messing around with my YX150 but I'm at it again. Funds won't allow me to continue the RM 125 for right now so I pulled the X15 apart and I'm working on it yet again. I wanted to put the X12 body on there but that won't work without major cuts I'm not willing to make so I will put it on another frame I will cut. Yes another frame. Yes another bike.

It's ok can't never have to many bikes. I have my street legal X-18, My sons X-19 and another X-18. I need a X-7 for stroke and an X-12, and maybe a X-22

I also have a gsxr

[drgnprelude]

It's ok can't never have to many bikes. I have my street legal X-18, My sons X-19 and another X-18. I need a X-7 for stroke and an X-12, and maybe a X-22

I also have a gsxr first of all i gotta say my hats off to u nutty for the work on this thread hopefully soon i can have something to compare

i would call myself the newbee on this forum and ive only been at this since i got my first mid late last year new since then ive been hooked hard

ya rene sounds like me i barely have any money lately prob cuz im trying to make all my bikes look nice perform well and fast lol like all my other things with a motor
i almost dont have any room for anything else im scared when winter comes and i gotta fit 5 mids a crf in the garage a mini 4 wheel my gsxr a x6 a show car and a project car something tells me nope it aint gonna fit i wonder how strong the rafters are lol heres a couple pics of my collection theres another x 15 next to the gsxr too lol i gotta stop

so thats a x18 2 x15 a x19 x6 some bike i dunno yet swheels said its a b1 immortal i attached a single pic of that one crf 50 mini 49 4 wheeler some little 2 stroke dont know what it is havent needed parts yet and 01 gsxr1000 thats about it

nice to meet yall

8591


8589

8590

[Blitz$M.Inc.$]

party at dragons house!

[swheels]

first of all i gotta say my hats off to u nutty for the work on this thread hopefully soon i can have something to compare

i would call myself the newbee on this forum and ive only been at this since i got my first mid late last year new since then ive been hooked hard

ya rene sounds like me i barely have any money lately prob cuz im trying to make all my bikes look nice perform well and fast lol like all my other things with a motor
i almost dont have any room for anything else im scared when winter comes and i gotta fit 5 mids a crf in the garage a mini 4 wheel my gsxr a x6 a show car and a project car something tells me nope it aint gonna fit i wonder how strong the rafters are lol heres a couple pics of my collection theres another x 15 next to the gsxr too lol i gotta stop

so thats a x18 2 x15 a x19 x6 some bike i dunno yet swheels said its a b1 immortal i attached a single pic of that one crf 50 mini 49 4 wheeler some little 2 stroke dont know what it is havent needed parts yet and 01 gsxr1000 thats about it

nice to meet yall

8591


8589

8590

As long as your garage don't start looking like minds did. You should be alright.
There was if i remember 3 more chassis behind the scene also.bluelaugh
But this weekend i'm supposed to be picking up 2000/01 yamaha TTR 125cc.I want to take the motor out of it and put it into one of my mids. I'm not a %100 sure i want to go through the hassle of fabing and welding to make the motor fit.
I always wanted a 5spd midbike for the race track though. Oh also was suppose to be looking at 2 other midbikes this weekend also. But i'm pretty sure i'm gonna pass on them. I still have to much junk to really do anything. But hey you can see the floor in the garage now,well in soome small spots.

[drgnprelude]

LMFAO I think we are mini Moto hoarders the pics I took were right after I spent the weekend getting all the motors and parts and boxes off the floor and putting everything up on the crawl space ya it doesn't look like this pics about a couple days later when I started tearing into a couple bikes

[swheels]

LMFAO I think we are mini Moto hoarders the pics I took were right after I spent the weekend getting all the motors and parts and boxes off the floor and putting everything up on the crawl space ya it doesn't look like this pics about a couple days later when I started tearing into a couple bikesYep it happens every time i get into a hobby i end up with a bunch of crap!!!! The good thing is i'll devote my time into one hobby at a time.LOL I can't do it like you guys, i get confused to easily.crazy_smilie

[Blitz$M.Inc.$]

my wife would be bitchin about that, S must crack the whip....whoop pow!

[drgnprelude]

Yep it happens every time i get into a hobby i end up with a bunch of crap!!!! The good thing is i'll devote my time into one hobby at a time.LOL I can't do it like you guys, i get confused to easily.crazy_smilie

ya honestly I hear ya about the hobby thing right now I got nitro r/c cars/trucks -midbikes -full size motorcycles cars a boat jetski ect ect no time far any of it really use the boat maybe 2times a year jetski lol can't remember motorcycle I ride to work sometimes can't remember just taking a cruise midbikes all the time with the kids but im lucky to get out of second round the hood prob a good run twice a month

couple of weeks ago we put over 160miles on the 18&19 that was fun no probs either other than running out of gas 6miles away from a gas station lol

I think after this winter im liquidating and only keeping one big bike and 4mids and then I can really devote what little time I got i mean i got a 160 motor about 4 months ago and haven't even attempted to install it yet wtf no time

[swheels]

ya honestly I hear ya about the hobby thing right now I got nitro r/c cars/trucks -midbikes -full size motorcycles cars a boat jetski ect ect no time far any of it really use the boat maybe 2times a year jetski lol can't remember motorcycle I ride to work sometimes can't remember just taking a cruise midbikes all the time with the kids but im lucky to get out of second round the hood prob a good run twice a month

couple of weeks ago we put over 160miles on the 18&19 that was fun no probs either other than running out of gas 6miles away from a gas station lol

I think after this winter im liquidating and only keeping one big bike and 4mids and then I can really devote what little time I got i mean i got a 160 motor about 4 months ago and haven't even attempted to install it yet wtf no timeOh my brother i'm in deep in deep i tell yell ya. Ok i skimmed down on the rc stuff.Though i still have quite a bit of parts like motors(Probably close to 20 nitro including the one apart) Probably 8 nitro 1/10 scale cars,Now down to 1 1/5 scale onroad car. And 5 Nitro 1/5 rc bikes 1. 1/8 electric and 1. custom made 1/12 eletric. All or most of my 1/5 nitro bikes are handmade ,even made a few sets of USD'S that's all filled and spring preload adjustable. Oh yeah i even made a couple of he riders.They lean of the bike and turn their heads too.LOL

Wait i just made an ass of myself.I truley realized i have a problem.crazy_smilie
hang on rider 001.MOV - YouTube
slow mo nitro - YouTube

[drgnprelude]

Its nice to c there are other people like me out there funny I had to come to a midbike forum to find em lol

Hobbies are a small addiction to me once I get into it I have to try and make it the best / fastest one around and once its done and I can't do anymore I get rid of it and get another one lol
We all have a (problem) that's why were here if I had no kids my house would have a room for each of my hobbies and my dining room would be my engine room lol it too bad I have to try and keep it in the garage plus with my kids getting older there starting to get into the bikes and r/c themselves so im loosing room everyday wonder what its gonna b like when they get into cars I'll def need some more room

[Blitz$M.Inc.$]

dragon, i dont think mass is big enough for your hobbies
S, man you need to start a supermini gp with all them bikes, looks like a grid to me

[swheels]

Its nice to c there are other people like me out there funny I had to come to a midbike forum to find em lol

Hobbies are a small addiction to me once I get into it I have to try and make it the best / fastest one around and once its done and I can't do anymore I get rid of it and get another one lol
We all have a (problem) that's why were here if I had no kids my house would have a room for each of my hobbies and my dining room would be my engine room lol it too bad I have to try and keep it in the garage plus with my kids getting older there starting to get into the bikes and r/c themselves so im loosing room everyday wonder what its gonna b like when they get into cars I'll def need some more room Yeah just to bad we all live so far away from each other.LOL I was considering moving down to Ga because i thought the race scene was gonna explode! But since the racing is lookin better up towards the north. That's where me and the family will be heading in a few years.LOL

dragon, i dont think mass is big enough for your hobbies
S, man you need to start a supermini gp with all them bikes, looks like a grid to meUse to have something like that going on.But all the rest of the guys QUIT ON ME! LOL Just when i was having fun too.LOL

[The Nutty Professor]

My vacation month is coming up. I plan to get shizzle done and ride more than the PW. The only saving grace about marriage was I had more time to work on the bike. Now I get......distracted bluelaugh

[Blitz$M.Inc.$]

uh like 'click here for horney singles in your area'?...big butts 9...bluelaugh
ya get to work, no excuses next year, ride or die old man