Yea! 55 mph!!!

[newb503]

I finally stopped being lazy and pulled out the gps to see how fast my completely stock bike goes. I timed it at 55 with one person and 45-48 with a 250 pound person. I need to get sprockets and a modded exhaust any place i can buy for cheap. Oh and what would be the best sprocket combo for this setup. (thats all im adding to the bike)

Thanks

[stuntnx7]

just modify the pipe thats on it

[Blitz$M.Inc.$]

17/38 is fine for stock

[X7rocks]

what gearing your runnning?

[newb503]

yea idk anything about these bikes i just have one and love it. Right now i dont know what im running (gearing) ill check later but yea idk how to modd it myself and im pretty sure ill screw it up if i try.

[newb503]

o and its stock gearing havn't changed anything if that matters.

[swanni06]

I am thinking about just changing my rear sprocket to a 28.
Make 1st and 2nd more useful.

[Blitz$M.Inc.$]

yer right swanni
fisrt and second will become more fun
on a stock motor it will suffer in third and forth till the revs get up
then it will have a much higher top speed, but a breeze will slow you down lol
that is what i noticed with 18/28 on the stock motor
when i went to the 125 first and second got a little better and third and fourth got a LOT better and would pull all the way to the topend
i dont know if my motor is ready for the 22 rear yet...but it will be eventually
for VIR im going 14/28 cuz of all the turns

[newb503]

ok so 17/38 it is? where is the best/cheapest place to buy from.

[Blitz$M.Inc.$]

your rear is 38, count the front

[Holeshotz Performance]

Front on the X18 is 14 tooth, if ya throw a 16 or 17 tooth on the front and get a mod pipe, jet kit and clamp on filter you should see some nice overall gains.

rock2

[newb503]

ok cool now last thing best site to buy from?

[125ccCrazy]

ok cool now last thing best site to buy from?


I have a new 16 tooth and a modded muffler I'll let go for $40 shipped...

[stuntnx7]

ive got a stock motor semi auto with 15/38 so if you got a manual you should go with a 16/38 if you wanna stunt but if you want speed then go more but lets face it your not gonna go but maybe 60 after you wait for 5 minutes to get the rpms up or find a hill or you can gear it right and get to 50 quick and still be able to do wheelies and stuff...

[newb503]

I really want a 17 any place to get it cheap, oh and 125cc crazy can I just get the muffler from you not the sprocket?

[125ccCrazy]

I really want a 17 any place to get it cheap, oh and 125cc crazy can I just get the muffler from you not the sprocket?

yeah just let me know

[newb503]

hey whats ur name on aim again i accedently deleted it
125cc

[125ccCrazy]

hey whats ur name on aim again i accedently deleted it
125cc

sent you a message again on aim......

[FINISHLINERACING]

ok cool now last thing best site to buy from?

Best site is www.Holeshotzperformance.com

[newb503]

yea already tried that, any other site.

[a biggs]

yeah im goin with what your looking to do....right now i got a 17th up front, "racing" cdi (something was wrong with my original), and holeshotz is modding my muffler and sending me the 26mm carb.....should have everything by about wednesday thursday.....ill let you know how its pulling

P.s. i guess i got a bad bike out the bunch but stock i ran about 40ish (190lbs) and with the 17th i ran 45 but couldnt top in 4th gear......

[stuntnx7]

has any1 tried that inner rotor kit....how much does it help...

[newb503]

yea a biggs let me know im 120 and it hit exactly 55 when i had to hit the brakes

[xxlarge420]

i have an X7 with a Lifan 140cc 4sp all up trans. that has numerous mods to the engine and different parts of the bike. i have a removeable rear scrape plate for wheelies, and i have 3 inch extensions coming off my rear axel for those interesting wheelies like 360degree wheelies. i start with one foot on one side of the rear peg and just pull it up in 1st and shift to 2nd by hand (this is by far the hardest part) and if i do it right i can keep the balance point and do 360 degree wheelies in about a 10 foot space. and when trying this the scrape plate becomes handy. unless u dont like the tail of your bike the way it is ( i learned that the hard way) and my sprockets are an 18t front sprocket and a 33t rear sprocket. i have a 22t rear sprocket but that is only for top speed runs and i havent even had a chance to use it yet.

[X7rocks]

i have an X7 with a Lifan 140cc 4sp all up trans. that has numerous mods to the engine and different parts of the bike. i have a removeable rear scrape plate for wheelies, and i have 3 inch extensions coming off my rear axel for those interesting wheelies like 360degree wheelies. i start with one foot on one side of the rear peg and just pull it up in 1st and shift to 2nd by hand (this is by far the hardest part) and if i do it right i can keep the balance point and do 360 degree wheelies in about a 10 foot space. and when trying this the scrape plate becomes handy. unless u dont like the tail of your bike the way it is ( i learned that the hard way) and my sprockets are an 18t front sprocket and a 33t rear sprocket. i have a 22t rear sprocket but that is only for top speed runs and i havent even had a chance to use it yet.

werent you on planet minis?
and you plan on letting that 22 sprocket go anytime soon?

[Blitz$M.Inc.$]

dude we got to have a vid of that!
come on now

[xxlarge420]

yes i am on planetminis and no i dont plan on selling that 22t rear sprocket for my X7. i am going to keep it until i put on my larger carb and bigger bore exhaust and then i am going to put on the 22t rear sprocket. i am only going to use the rear sprocket for top speed runs though. i think that it will help

[xxlarge420]

i only wish i had a digital camcorder to post some vids, but with all of my bills and hobbies(my hobbies cost me the most), a digital camcorder is the last thing i want to spend money on. maybe i can find a friend who has one and then i will post some vids or picks of some of the stunts i do and some of the stunts im working on.

[newb503]

yea i have one ill see if i can get one up im kind of computer illiterate though when it comes to that stuff :(.

First i have to get my chain breaker and fix the chain then ill try and get one up