PDA

View Full Version : Oil cooler?

newb503
10-23-2007, 03:50 PM
Do you need one and how long can u ride w/ out stopping to let it cool down? I dont have one and i plan to take my bike to my uncles where i can ride everywhere. I didn't know how long it could go w/ out stopping and taking a break.
125ccCrazy
10-23-2007, 04:24 PM
as long as you dont just set and idle for hours you will be okay, a cooler is always a good idea especially if you do any mods to the engine but you will be fine with the way it is...
The Nutty Professor
10-23-2007, 04:42 PM
I would agree with 125cc. Most people add oil coolers when they start to push the motor like racing. Otherwise a cooler isn't needed.
#84
10-23-2007, 05:06 PM
during break in you want to let it cool down about every 30 minutes until its cool to the touch. once you have done this about twice your good to ride for hours on end.
newb503
10-23-2007, 09:17 PM
ok cool but one more off topic ? what is a good sprocket to go with a modded muffler and a 16 front. I need a rear sprocket and dont know what to go with (I want speed if it matters). I heard a 32 but dont know if i should go with it or ask here so i asked.
#84
10-24-2007, 11:39 AM
just get a 17 tooth counter sprocket and use the stock rear sprocket.
Blitz$M.Inc.$
10-24-2007, 02:30 PM
no that sux, get a 28
it makes first and second great
third and forth suffer a little till you get up in revs but your top speed is much higher
newb503
10-24-2007, 04:45 PM
damn so many opinions idk which one to go with i really want top speed and i dont want have unbelieveably slow acceleration.
Blitz$M.Inc.$
10-24-2007, 05:42 PM
its not, its just not bang in third and forth in the low revs
first and second way make up for it
promise
newb503
10-25-2007, 12:56 PM
ok so i guess im going with a 28 any website suggestions that would sell it pretty cheap. and yes i know about pbu.
swanni06
10-25-2007, 01:14 PM
holeshotz man
newb503
10-25-2007, 01:26 PM
yep already tried him any other sites
mishka
10-25-2007, 01:28 PM
so ur going with a 28 rear and 17 front?
newb503
10-25-2007, 01:29 PM
im going with a 28/16
mishka
10-25-2007, 01:37 PM
oh okay sweet umm
i looked around but i cant find the 28 sprocket..
so its holeshotz or pbu...
unless someone else finds another site!thumbsup2
good luck
Blitz$M.Inc.$
10-25-2007, 02:20 PM
only pbu has it