walboro carb

[medwards420]

I just installed my carb, v stack and airfilter assembly and i cant get it to start. Ive been giving it gas from the carb itself for now because my throttle cable seems to be stuck and i dont know about that either maybe you guys can help me with that also. I tryed to post pics to show you but I dont know how. I hope you can still help me!

[medwards420]

anybody?????????plz help me

[dragonkeep2000]

which carb are you using...? did you check your gas lines...? which v-stack are you using....?

[medwards420]

carb bulb is fillin up with gas,i dont know what kind of carb other thn its a walboro

[medwards420]

http://www.pocketbikeplanet.com/attachments/f30/38388d1240184309-walboro-carb-carb.jpghttp://www.pocketbikeplanet.com/attachments/f30/38389d1240184309-walboro-carb-air.jpg

[125ccCrazy]

I just installed my carb, v stack and airfilter assembly and i cant get it to start. Ive been giving it gas from the carb itself for now because my throttle cable seems to be stuck and i dont know about that either maybe you guys can help me with that also. I tryed to post pics to show you but I dont know how. I hope you can still help me!

If the carb's butterfly is larger than the inlet on the intake manifold it may be binding causing the throttle to stick, if thats not the case then try putting a return spring between the cable bracket and throttle arm on the carb, the stock spring on the carbs is not strong enough for pocket bike applications..

Now as far as not running, make sure the gaskets are installed correctly and that the pulse ports are not blocked, you also have to enlongate the pulse port on the intake manifold to work with walbro carbs, the pulse port on the walbro carbs dont line up with the port on the intake manifold, if the ports don't line up the pump in the carb wont work and pull fuel from the tank..

[medwards420]

so what do i have to do

[medwards420]

its pulling fuel to the carb cuz the bulb is filling up with gas