stunt bike build

[bbbx18boyyy]

ok guys i finaly got it figured out i am gonna do this 2 my x18
1.gpx 125cc from tbolt
2.12 oclock from pbu
3.stunt pegs from pbu
4.drag exhaust from pbu
5.14 tooth front sprocket
6.sliders from pbu
can i electric start a 125cc i got a brand new battery from pbu
where can i buy front brake pads for it

[K-Pac]

ok guys i finaly got it figured out i am gonna do this 2 my x18
1.gpx 125cc from tbolt
2.12 oclock from pbu
3.stunt pegs from pbu
4.drag exhaust from pbu
5.14 tooth front sprocket
6.sliders from pbu
can i electric start a 125cc i got a brand new battery from pbu
where can i buy front brake pads for it

I don't about this drag exhaust.. when you pop wheelies won't it hit the ground? And I think you can electric start a 125cc, contact Vince at Tbolt, he probably knows how..

[bbbx18boyyy]

thanks

[FiveStarSky]

dont get the cheap pbu 12 bar or the frame sliders, the frame sliders are only about an inch long, and are actually just bar ends, wont help protect anything, and the 12 bars there look pretty cheap, and unless you know what your doing, you really dont need a 12 bar, especially if your not running a hand brake

[bbbx18boyyy]

u think ii culd electric start it

[The Nutty Professor]

Dude get with Stuntn on this stuff he's the go-to. Just a bit of advice look at the stuff you like at PBU and then look on Ebay for it. You'll be surprised at the price difference you can find sometimes. As for sliders check out skateboard wheels they work and work a lot better in some cases. Bar end sliders suck cheese. They grind down fast and easy so they won't dig in and flip the bike in a slide. You need something tough but slippery.

[Monster_Bike1780]

the plastic skateboard wheels usualy work best with that, becuz they are tough they slide across the cement, and i know they slide on the cement

[FiveStarSky]

i found some 3" sliders on ebay for $25, they work very well, and are tough, come with an extra incase you happen to grind one down, but will all the falls my ysr has been through including a few slides, they are barely touched.

[Niusiic[latvia]]

well, about 12 bar, better make one not buy one

[SoPackedCustoms]

here you go for a crash cage

[briansX19haulsass]

bombparts.com is a pretty cheap place for stunting stuff as well. I got my 12 o clock bar for 20 bucks there and it is very strong and hasnt bent....

+1 for Tboltusa.com he is a great seller. You might as well go with a 140cc though they are like the same price...

[bbbx18boyyy]

thnaks gave bombparts a call and orderd a
1.12oclock
2.sliders
3.pegs

did i blow my clutch when i pull in my clutch handle and let of the throttle my bike still goes about 3or 4 mph and it dosent slow down help

[Blitz$M.Inc.$]

no you just need to adjust the cable

[briansX19haulsass]

thnaks gave bombparts a call and orderd a
1.12oclock
2.sliders
3.pegs

did i blow my clutch when i pull in my clutch handle and let of the throttle my bike still goes about 3or 4 mph and it dosent slow down help

Ya hes a good guy with good prices... Give Vince at Tboltusa a call as well he is a very helpful guy as well

[stuntnx7]

bombparts.com is a pretty cheap place for stunting stuff as well. I got my 12 o clock bar for 20 bucks there and it is very strong and hasnt bent....

+1 for Tboltusa.com he is a great seller. You might as well go with a 140cc though they are like the same price...




its might not be bent right now but it will bend if you ever clutch it up and hit it. I would even be scared to stand on it. The metal is too thin.

[FiveStarSky]

yup, and a 12 bar is useless if you dont have a rear hand brake.

and @ brian, have you actually scrapped your 12 bar yet or tried standing on it?

[Niusiic[latvia]]

here you go for a crash cage

Well, I hope that cage is attached in right places if so if you drop it and it's attached in wrong place it could snap frame

[FiveStarSky]

;45453']Well, I hope that cage is attached in right places if so if you drop it and it's attached in wrong place it could snap frame

it looks to be okay, only thing i dont like about it is the part that sticks out, if you put a slider on it adn go down on asphault it should be fine, but if it hits grass that thing is gonna dig in and could end up flipping the bike.

If i had some pipe i would have one on my YSR already banghead

[bbbx18boyyy]

anybody watch wwe last night mike tyson knocket chris out

[stuntnx7]

yup, and a 12 bar is useless if you dont have a rear hand brake.

and @ brian, have you actually scrapped your 12 bar yet or tried standing on it?




why is the 12 bar useless without a HB :dunno:

[FiveStarSky]

why is the 12 bar useless without a HB :dunno:

well, not uselss, but having a HB really helps, cuz if your standing on the bar, need the HB to keep you ballanced.

[Niusiic[latvia]]

well, not uselss, but having a HB really helps, cuz if your standing on the bar, need the HB to keep you ballanced.

Well, you can use FB too ;)

[stuntnx7]

well, not uselss, but having a HB really helps, cuz if your standing on the bar, need the HB to keep you ballanced.



ah you mean for off peg tricks. I thought you meant just to scrape it.

[FiveStarSky]

ah you mean for off peg tricks. I thought you meant just to scrape it.

yeah, sorry, should have been more clear.

[stuntnx7]

yeah, sorry, should have been more clear.




i can do SS all day in first and 2nd without a HB but it gets sketchy if you're not controlled with it

[FiveStarSky]

i can do SS all day in first and 2nd without a HB but it gets sketchy if you're not controlled with it

yeah, i wouldnt run a 12 without a HB, just to keep me from looping if possible

[briansX19haulsass]

yup, and a 12 bar is useless if you dont have a rear hand brake.

and @ brian, have you actually scrapped your 12 bar yet or tried standing on it?

Yes PLENTY of times guessing 20 scraps.... havent stood on it lol. Well worth the money.. If it wasnt for it then I would have gone thourgh 20 exchaust pipes, cause as you can see that is what takes all the force if I go back..

[FiveStarSky]

Yes PLENTY of times guessing 20 scraps.... havent stood on it lol. Well worth the money.. If it wasnt for it then I would have gone thourgh 20 exchaust pipes, cause as you can see that is what takes all the force if I go back..

yeah, they can help, but if you do endos, that thing can become dangerous. i have been thinking of putting on on the why-sir, but am afraid of bending the subframe

[bbbx18boyyy]

do u think the pbu one is better
how much is a hand brake is it easy to install

[stuntnx7]

do u think the pbu one is better
how much is a hand brake is it easy to install



i need a link to tell you if its better and if you dont want a footbrake then a HB is easy to install. Simply put a longer brake line on your caliper and put the HB on it thumbsup2

[bbbx18boyyy]

http://pocketbikesunlimited.com/12-OCLOCK-BAR.html

[bbbx18boyyy]

http://www.youtube.com/watch?v=riPS4pGgXG4&feature=PlayList&p=3905AA2BA22F43EC&playnext=1&playnext_from=PL&index=1


brians got the 1 from bombparts

[stuntnx7]

http://pocketbikesunlimited.com/12-OCLOCK-BAR.html



it cost to much but its way better thumbsup2 I'd still have to figure something out on that 12 bar if i got it bcuz its only held on with clamps

[briansX19haulsass]

the one I have has worked fine....

[stuntnx7]

the one I have has worked fine....



for scraping maybe but plastic and exhaust works too thumbsup2 IF you want to actually use the 12 bar for combos then it needs to be strong

[bbbx18boyyy]

thanks

[bbbx18boyyy]

http://www.youtube.com/watch?v=QRGGXn43zO8

me i know ists kinda supid

[stuntnx7]

get those feet up so you can hit the brake instead of lettin the bike go and wreckin it

[FiveStarSky]

wheres the helmet bro?

[briansX19haulsass]

If you want a helmet I have a extra KBC black and white one for sale.. PM me if you are interested.

[bbbx18boyyy]

my x18 gas tank fairing is cracked can i put a x7 1 on it

[Stomper]

wheres the helmet bro?

+1 always wear a helmet, my cousin is blind because of a motorcycle accident, he didnt had a helmet, so please don't be dumb like him and put one. :yup:

If you tink about buying stuff for your bike you should think about protection first, a helmet is not an option, you should get a full body armor or at least a spine protector and somthing for your leg and hands to protect them if you fall.

Remember that it always cost less to buy some protection than wasting 2 or 3 weeks in hospital.

[Blitz$M.Inc.$]

looks kinda funny doin a wheelie with your nutz
one good crash will learn ya

[bbbx18boyyy]

http://www.youtube.com/watch?v=a1eiEH8l_LU&feature=related

[Monster_Bike1780]

http://www.youtube.com/watch?v=a1eiEH8l_LU&feature=related

see even they wear helmets bro, wear helmet, even if its a corny one, it still protects your head.thumbsup2 And I agree with ya blitz on that one, its a painful, but rememberable way to not forget about it.bluelaugh

[FiveStarSky]

thats how i learned, one time going down without a helm, i made sure i had one before i rode again

[briansX19haulsass]

wheres the helmet bro?

the black and white one in my videos. The one I am whereing in the x18 vs. my bike.

[bbbx18boyyy]

i got a helmet just wasent wearing it

[FiveStarSky]

i got a helmet just wasent wearing it

lot of good that does, if your not gonna wear it might as well just spent that money on a health insurance plan

[bbbx18boyyy]

ok ok ok ok ok

[briansX19haulsass]

ok .

[bbbx18boyyy]

its just that he told me like 3 times sorry:dunno:

[briansX19haulsass]

ahahaha I know they do the same to everone lol. I was just busting your balls.

[bbbx18boyyy]

hahahahhahahahabluelaugh

[bbbx18boyyy]

i was thinking of keeping my bike as a stunt bike and buying k-pacs for a race bike wata ya think

[Monster_Bike1780]

i was thinking of keeping my bike as a stunt bike and buying k-pacs for a race bike wata ya think

if you got the money then yea, cuz i might scoop that 140 off of him if ya dont get that bike uberly fastmoon1

[briansX19haulsass]

how much does he want for it

[Monster_Bike1780]

how much does he want for it

idk but dont worry bout us busting your balls bbbx18boyyy, we always bust brians balls for not wearing pants when hes stunting, cuz he wears shortsNutty-Rant!!soap_box

[bbbx18boyyy]

he wants 1300 for it and he said hes not parting it

[briansX19haulsass]

idk but dont worry bout us busting your balls bbbx18boyyy, we always bust brians balls for not wearing pants when hes stunting, cuz he wears shortsNutty-Rant!!soap_box

hahahhaa, I know lol but I just got a new helmet if that helps hahaa Better then nothing

[briansX19haulsass]

he wants 1300 for it and he said hes not parting it

Damn. I guess thats a fair price

[K-Pac]

Well I never intended to sell it but if bb wants to buy it, I gave him a price. Take it or leave it, both ways I get to ride on a motorized vehicle..

[bbbx18boyyy]

what mods can i do 2 my 110cc 2 make it go 60 plus

maaybe this correct me
1.114cc big bore kit
2.22mm mikuni carb
3.drag muffler
4.hitman bigblock
5.28 tooth rear sprocket

[stuntnx7]

what mods can i do 2 my 110cc 2 make it go 60 plus

maaybe this correct me
1.114cc big bore kit
2.22mm mikuni carb
3.drag muffler
4.hitman bigblock
5.28 tooth rear sprocket




high compression will make stunting more difficult twocents. Throw a CDI, coil, and a carb on it and do work. My bike only has a CDI and coil. thumbsup2

[BMArias15]

high compression will make stunting more difficult twocents. Throw a CDI, coil, and a carb on it and do work. My bike only has a CDI and coil. thumbsup2

^^^^ I agree... But also you shouldn't be tryin to have such a fast bike if it's gonna your stunt bike, your best friend should be geAring but you can't gear your bike for both speed and stuntin... Jus keep your bike to the basics as stated Above by Stuntin (carb, gearing, cdi, exhaust, filters, etc) and make sure your bike can take the beating it's gonna get.

Goodluck bro

[briansX19haulsass]

what mods can i do 2 my 110cc 2 make it go 60 plus

maaybe this correct me
1.114cc big bore kit
2.22mm mikuni carb
3.drag muffler
4.hitman bigblock
5.28 tooth rear sprocket

I like the orignal Idea of just going with a 125 or 140 from tbolt. Either of those will blow those mods out of the water. You can keep stock gearing with either and the front end comes up by itself.

[bbbx18boyyy]

i found a track near me so know im gonna make super race bike
1.192cc from tbolt with 6plate clutch,de comp kit,28mm carb
2.trail tech vapor
3.clutch handle from tbolt
4. drag pipe from pbu
5.18 tooth front sprocket from pbu
6.28 tooth rear sprocket from pbu
7.gold race chain from tbolt

i wanna hit 95 plus wata ya think

[briansX19haulsass]

great place to get your stuff from.

dont get 18 28. 18 front is sketchy on these motors. Just go 15/22 that is the same as 18/28.

What i have to say to the whole thing.........get saving lol!!!!

Also I think one thing EVERONE who has built a bike on here will agree with me on. Leave 100-200 dollars just for the little things that you find you have to upgrade or replace to the bike or motor. Just the little things.

[bbbx18boyyy]

yeah i have 800 saved and im gonna get 1000 for my comfirmation im gonna start the build in november lol

[briansX19haulsass]

tires? suspension? Gear? if your at a race track those are the most important things.

[bbbx18boyyy]

where should i get the tires wtat website

[briansX19haulsass]

www.motorcyclesuperstore.com or xmrpros.com

[bbbx18boyyy]

whats the name of the tire copany

[bbbx18boyyy]

i cant find it

[briansX19haulsass]

maxxis 130/70-10

[K-Pac]

I got mine from BikeBandit.com. Just search Maxxis 130/70 - 10 and 100/90 - 10

I think its called like Maxxis M6029 or something...

[bbbx18boyyy]

thanks im gonna get them from bikebandit

[K-Pac]

Rear tire: http://www.bikebandit.com/maxxis-m6029-scooter-moped-tire
Front Tire : http://www.bikebandit.com/maxxis-m6114-scooter-moped-tire


Be sure to click on the 10" option.

[bbbx18boyyy]

thanks

[stuntnx7]

id use your stock ones up before you take them off. I can burn a stock rear up in a day if i do enough rollin burnouts. Ive blew one up at the race track bluelaugh

[bbbx18boyyy]

yo guys sickest thing just happend my brother was riding his 110cc pit bike and alog came a gixer 1000cc the they started talking ,racing ad doing wheelies hahahahah

funiest thing is my brother is 11 ad the guy was 18 lmfaobluelaugh

[K-Pac]

yo guys sickest thing just happend my brother was riding his 110cc pit bike and alog came a gixer 1000cc the they started talking ,racing ad doing wheelies hahahahah

funiest thing is my brother is 11 ad the guy was 18 lmfaobluelaugh

video?

[bbbx18boyyy]

not this time but he lives on my street ill have 2 make a video soon

[bbbx18boyyy]

ill see if i can get a video of them tommorow bluelaugh

[bbbx18boyyy]

http://www.youtube.com/watch?v=fBelT2QDl-w


my favorite bike 2006 gsxr 1000

[briansX19haulsass]

http://www.youtube.com/watch?v=fBelT2QDl-w


my favorite bike 2006 gsxr 1000

hahaha thats what I based my bike on a 2006 gsxr 750 paint sceme with 1000 graphics.

[bbbx18boyyy]

hahahaha

[bbbx18boyyy]

bluelaugh

[bbbx18boyyy]

how fast do you guys think the 192cc will go with the 28 carb 6 plate clutch de comp kit im gonna keep stock gearing with maxxis tires and aftermarket exhaust im looking at 95 plus i weaigh about 130

[briansX19haulsass]

Stock gearing maybe 70 aftermarket gearing 90-100. Its all in the gearing for speed my man. You wouldnt want stock gearing. You would be wheeling all day.

[RomanianRacer]

Stock gearing maybe 70 aftermarket gearing 90-100. Its all in the gearing for speed my man. You wouldnt want stock gearing. You would be wheeling all day.

its a stunt bike, isn't that what he wants to do?bluelaugh

Yea the 160's and bigger with a 42+ rear tooth sprocket will get you 4th gear wheelies easy. Stock on my bike is a 32 tooth so you could hit at least 75-80.

[briansX19haulsass]

well he wants2 be wheeling and goin 95 he says soooo.

I think he has to get his mind made up first
Started with a 125cc from TBolt then a 114cc bbk then to the 192cc

[bbbx18boyyy]

i made up my mind im gonna get the 192cc what kind of front brake pads should i get

[K-Pac]

i made up my mind im gonna get the 192cc what kind of front brake pads should i get

Your going to be going real fast. I think KBC brake pads are compatible with our bike. Nutty P has a thread on it.

[briansX19haulsass]

Ya our just buy the whole front brake setup with pre installed KBC pads from the guy doing the X18 part out on here. The whole thing is $40 bucks. Seems good to me.

[Blitz$M.Inc.$]

i made up my mind im gonna get the 192cc what kind of front brake pads should i get

none, just get a deployment parachute speechless33 rock2

[bbbx18boyyy]

thnksssssz:smokin:

[X7rocks]

i think before anyone says numbers like 85 mph and 90 and 100. you should get someone to do it first....with our kind of budget and either GPS it or radar it stop throwing numbers around.

[Blitz$M.Inc.$]

but everyone already knows that the 192 goes 91.5 mph

[bbbx18boyyy]

koool

[K-Pac]

koool

I wish for your safety...

[briansX19haulsass]

bluelaughbut everyone already knows that the 192 goes 91.5 mph

hahahaha ya and a 184cc goes 87.657mph no matter what the gearing

[Blitz$M.Inc.$]

yup see, brian knows bluelaugh

[Monster_Bike1780]

yup see, brian knows bluelaugh

what x7rocks hasnt heard about it??bluelaugh

[bbbx18boyyy]

did they dyno it

[bbbx18boyyy]

hi this guy that has a 08 gixxer 1000 and got a aftermarket exhaust i was gona buy the stock exhaust from him for 25 dollers will it fit fit on a 192cc

[stuntnx7]

hi this guy that has a 08 gixxer 1000 and got a aftermarket exhaust i was gona buy the stock exhaust from him for 25 dollers will it fit fit on a 192cc



bluelaugh that thing is to big.

[bbbx18boyyy]

i was gonna do some major modding

[bbbx18boyyy]

my brother is gonna trade his 110cc pitbike for a auto 110cc x19 hes gonna put a pirana 140 in it and alot of other stuff

[Monster_Bike1780]

my brother is gonna trade his 110cc pitbike for a auto 110cc x19 hes gonna put a pirana 140 in it and alot of other stuff

why do that?? when u can do that to the pitbike?? plus you would have to rearrange the the brake set up, becuz the autos have for the left handle bar, where the clutch handle goes normally, is the front brakes, correct me if im wrong, but you be looking at modifying the brake line, like one off an x15 manual or even x19 or possibly even an x18 one, and be using a foot brake. Just my opinion...

[stuntnx7]

why do that?? when u can do that to the pitbike?? plus you would have to rearrange the the brake set up, becuz the autos have for the left handle bar, where the clutch handle goes normally, is the front brakes, correct me if im wrong, but you be looking at modifying the brake line, like one off an x15 manual or even x19 or possibly even an x18 one, and be using a foot brake. Just my opinion...



midbikes are better than pitbikes duhh thats why crazy_smilie and you dont "need" to move the HB on the left bar if you can 2 finger it like stunter rock2 go shorty clutch lever and long HB lever..


ps to the guy trading for the x19...lemme know a shipped price on the engine if its all good bcuz i know somebody that might pick it up when there tax return comes

[bbbx18boyyy]

it hase a foot brake

[Monster_Bike1780]

it hase a foot brake

oh well damn that even easier to convert over then, lolbluelaugh

[bbbx18boyyy]

hahahahha

[bbbx18boyyy]

my x18

http://www.youtube.com/watch?v=1nj-AVCaen0

[Blitz$M.Inc.$]

hey, when you go to paint your bike, take the panels off and the lights too or tape them off good

[bbbx18boyyy]

thats how i sanded them lol

[Monster_Bike1780]

hey, when you go to paint your bike, take the panels off and the lights too or tape them off good

hey blitz what grit would you use to sand down the x15 body???

[bbbx18boyyy]

i used wetsand 220 and 400

[bbbx18boyyy]

my brother is gonna get this x18 instead http://www.youtube.com/watch?v=G_aVJj85yvc&feature=channel

[Blitz$M.Inc.$]

monster, i used 400 wet
bbb, that bikes pipe is too close to the rear wheel, one good bump and either the fender will break or worse

[bbbx18boyyy]

i know my brother is ganna get the sideswipe pipe from pbu

[bbbx18boyyy]

my engine is completly shot so im gonna get a thumpster 125cc e start becuse i sold my baja 125 then in september im gonna get a tb 160 big bore kit bluelaugh

[briansX19haulsass]

cool now DO IT!!! get the motor and get to work hahaha

[bbbx18boyyy]

okay i disconnected the wires but there is 1 i dont know what is fore it come from the front of the engine and connects to a thing near the battery by a nut can i use the stock pipe and carb for know

[briansX19haulsass]

Pipe....Only if you have to for a short period of time.

Carb...Hell no. Way to small bro.

I wouldnt run either on a new motor. Its like making it breath through a straw and exhale through another one.wave_finger

[bbbx18boyyy]

22mm or 24mm carb

[bbbx18boyyy]

i found some realy cheap 26mm carbs on ebay also with my new carb i have to put the choke attechment from the old 1 on it right

[briansX19haulsass]

what motor do you have?

[bbbx18boyyy]

a 124 e start thumpstar

[briansX19haulsass]

http://www.tboltusa.com/store/tb-mikuni-vm26mm-carb-kit-26mm-intake-p-576.html?osCsid=6d5ae99bc119feac7f4803306f316b00 That is what you should get if you really want a good carb. Give Vince a call see what other carbs he has maybe for cheaper. He is the one that would no the best you know. Maybe he will give you a package deal....1-215-630-3554, tell him Brian sent you.

[bbbx18boyyy]

ok but i have to put the old carb -choke attchments on it right

[briansX19haulsass]

No you dont run the choke cable anymore lol. You just reach down and pull it yourself. It is really no big deal. That goes for all aftermarket carbs. Unless you are really good with custom fabing cables and chokes.......

[Blitz$M.Inc.$]

with a good carb you dont really need the choke anyway, maybe rarely
crap carbs = all the time

[briansX19haulsass]

with a good carb you dont really need the choke anyway, maybe rarely
crap carbs = all the time

Ya I only had to use the carb on my OKO when it was really cold or sat for a while.

[bbbx18boyyy]

ok thanks i was wondering

[bbbx18boyyy]

ok i just took the engine out and know im painting my plastics 3 coats wetsand and 2 more coats

[bbbx18boyyy]

i also painted my muffler tip and pipe with grill paint and my windsheild the same colors as my plastics

[briansX19haulsass]

Nice keep up keeping on.

[bbbx18boyyy]

i just got 20 for shovleing 1 of my neighbors driveway haha know i have enough to buy my carb

[bbbx18boyyy]

ok somim gonna put a video up of my bike in april when its warm and have all my upgrades

[bbbx18boyyy]

soes any one know how to gut a stock 18 muffler

[K-Pac]

ahh man I knew a while back. Why don't you just buy a pitbike one, their pretty cheap.

[bbbx18boyyy]

i gutted my muffler this morning and wrapped it

[bbbx18boyyy]

swheels for the dual front brake can i use 2 x18 front rotars and 2 x18 calibers also how did u get the left caliber to stay on

[RomanianRacer]

swheels for the dual front brake can i use 2 x18 front rotars and 2 x18 calibers also how did u get the left caliber to stay on

you gotta use two legs that have the caliper mount on them, so you have to buy another set of forks to get that leg.

[bbbx18boyyy]

cant i just weld a bracket

[RomanianRacer]

you could I'm not sure if your good at welding or not, also its all the one piece and contains the same type of metal. I wouldn't want the fork falling apart at 45mph cause of cracks from the welding, the material they use ain't the best.

[Blitz$M.Inc.$]

http://midbikenation.com/showthread.php?t=871
http://midbikenation.com/showthread.php?t=1767

[kevinneedsabike]

bbb wered u put my xbox

[kevinneedsabike]

it was in my room soryy bbbbanghead

[bbbx18boyyy]

cant wait till i get my engine mounted

[bbbx18boyyy]

i am otally gettin this for my x18 little pricey but ****ing worth it
http://www.tobefast.com/cycle-sounds-sportbike-sound-system-2-speakers-pr-10001601.html

[The Nutty Professor]

it was in my room soryy bbbbanghead

Brah if it was in your room and it took you a while to find it.....I have the hot line number for a maid service bluelaugh thumbsup2

[The Nutty Professor]

i am otally gettin this for my x18 little pricey but ****ing worth it
http://www.tobefast.com/cycle-sounds-sportbike-sound-system-2-speakers-pr-10001601.html

One question are you ridin legal or ghetto cruisin? I ask because boomin is just gonna get the Po-Po called on ya quick. If you're legal they'll just tell ya to turn it down. If not....and there is a helmet out there with built in speakers. But doing a search all I could find were the ones for the cruisin GoldWing crowd. I couldn't find the sport bike helmet. That being said there are systems you can buy to put in the helmet you already have and I can tell you in helmet sound is going to sound a whole lot better than speaker having to fight the noise of your exhaust, the wind, and other traffic. Just my opinion. :dunno:

[swheels]

swheels for the dual front brake can i use 2 x18 front rotars and 2 x18 calibers also how did u get the left caliber to stay on Yeah you could but they will be facing in opposite directions.Since you will still have to get the other forkleg with the caliper mount.Might as well setup up with for some x6 calipers.

Blitz has done an execellent write up on the duals.

[stuntnx7]

One question are you ridin legal or ghetto cruisin? I ask because boomin is just gonna get the Po-Po called on ya quick. If you're legal they'll just tell ya to turn it down. If not....and there is a helmet out there with built in speakers. But doing a search all I could find were the ones for the cruisin GoldWing crowd. I couldn't find the sport bike helmet. That being said there are systems you can buy to put in the helmet you already have and I can tell you in helmet sound is going to sound a whole lot better than speaker having to fight the noise of your exhaust, the wind, and other traffic. Just my opinion. :dunno:



yea but its so coo when you roll up with the stereo on doin a wheelie bluelaugh if i had an ipod i would not have computer speakers anymore bluelaugh id mount my speakers right to the upper stay

[Blitz$M.Inc.$]

Brah if it was in your room and it took you a while to find it.....I have the hot line number for a maid service bluelaugh thumbsup2

lol bluelaugh

[bbbx18boyyy]

i am gonna try this stuntnx7 http://www.tboltusa.com/store/handle-bar-mount-risers-universal-78-to-18-in-black-p-1330.html?osCsid=034a54a1941914ba7670f31671553073
im gonna weld tha on and use these bars
http://www.thestuntfactory.com/vodiha78.html hb817

[stuntnx7]

i am gonna try this stuntnx7 http://www.tboltusa.com/store/handle-bar-mount-risers-universal-78-to-18-in-black-p-1330.html?osCsid=034a54a1941914ba7670f31671553073
im gonna weld tha on and use these bars
http://www.thestuntfactory.com/vodiha78.html hb817




dont weld on the triples.. heres what i was gonna do....grind enough off the top triple so the risers can sit right next to the triple tree nut flush on the triple. Position the riser so the allen head on the bottom of the triple will clear the gussets.

[kevinneedsabike]

lol can u explain the last part again im a little slow
:wave:

[stuntnx7]

lol can u explain the last part again im a little slow
:wave:



look on the bottom of the triple. It has gussets. You dont want to drill into them. Make sure you dont eggshape the holes when drilling the holes for the risers. Measure 2 or 3 times. Start with a small bit so you can get the hole started and centered where you want. If one hole is off a lil bit you can use the drill bit to bring it back to center. Take it slow and the holes will be straight and your bars wont wiggle


dont want the holes messed up or the bars will sit on there messed up

[bbbx18boyyy]

kbluelaugh

[bbbx18boyyy]

yeah these riser look much better im gonna grind the tiple down smooth 2 fit the risers nicly and drill holes for the risers and put washers and nut 2 hold it on gonna feel much more conferble and better wheelies
http://www.motorcycle-superstore.com/4/22/263/8216/ITEM/Pro-Taper-Universal-Bar-Mount-Kit.aspx?sst=RR|8216

[bbbx18boyyy]

so guys i know have my stickers on my bike and a offical mikuni 26mm carb and the thumpstar 125 e start engine is on the way

[bbbx18boyyy]

did they cancel jason brittons show on speed channel
superbikes

[briansX19haulsass]

did they cancel jason brittons show on speed channel
superbikes

yes...

[kevinneedsabike]

bbb is a ***bluelaugh

[kevinneedsabike]

smd bluelaughbluelaugh

[bbbx18boyyy]

http://www.youtube.com/watch?v=zg2Eq6kHWEo

[Blitz$M.Inc.$]

you are wrong wave_finger
it goes on the brass nipple
the thing you put it on have a hole in it?
the bottom is the overflow drain

[bbbx18boyyy]

bluelaugh thank you so much im gonna post a video o my bike in 2 weeks or sooner cuse im ordering my engine friday

[briansX19haulsass]

hahaha:bananar:

[bbbx18boyyy]

its penut butter jelly time lolbows_smilie

[bbbx18boyyy]

http://www.youtube.com/watch?v=JhRJVPLNUFI

[briansX19haulsass]

I would beat you guys if you where my kids........ I dont know if you are just swearing for the video but damn dude you to combined must have gone over 20 in 2 minutes.....wave_finger

It almost sounds like its your kill switch not working right..... Escpically by the way it sounds like turn on for a half second then turn off....

[FiveStarSky]

Kill switches are for girls, do what i do, just dump the clutch and stall the motor out, or reach under an yank the wires out of the coil lol

[briansX19haulsass]

Kill switches are for girls, do what i do, just dump the clutch and stall the motor out, or reach under an yank the wires out of the coil lol

hahahahspeechless33