In Need of a Exhaust

[K-Pac]

Alright guys, just wondering what kind of exhaust are in the market now. I'm trying to get one that comes right under the bike but the only people that sell those are PBU and I want to be a little original.

a) Do you guys know of any exhausts that come right up the back for our bikes?
b) Or just any exhaust that will bolt right up? Tried to get a pitbike pipe, ended up just losing money banghead

[Blitz$M.Inc.$]

i heard the monkey bike pipes are close, dax too
i used a pitbike pipe, i just had to cut and reweld a few times to get the shape i wanted, i suppose i could have filled it with sand and bent it with the torch but i wanted to weld to get practise
as a last resort if i had no other way id take a pipe and my bike to a muffler shop with some beer and be like you can fit this in here?

[The Nutty Professor]

I wanted to start welding up pipes without cans but I can't afford a tig just yet. I guess a gas mig would work fine but if I'm buying another welder I'm going tig. The only other problem is I'd need an X18 frame and a 110 stock motor. I have the X15-X19 frame but the 3V motor I have I don't think would cut it for fab work. I think there are to many headers that don't fit with exhaust cans people don't like. Just my take on it.

[Monster_Bike1780]

I wanted to start welding up pipes without cans but I can't afford a tig just yet. I guess a gas mig would work fine but it I'm buying another welder I'm going tig. The only other problem is I'd need an X18 frame and a 110 stock motor. I have the X15-X19 frame but the 3V motor I have I don't think would cut it for fab work. I think there are to many headers that don't fit with exhaust cans people don't like. Just my take on it.

I will sell or trade my 110 to ya nutty

[The Nutty Professor]

Brah I need a X18 frame before I need a 110 I can't use. Sorry :dunno:

[K-Pac]

This seems to be a descent pipe:

http://www.ooracing.com/store/index.php?act=viewProd&productId=605


You guys knows anywhere else that sells monkey bike pipes? Can't seem to find any dealerships.

[Monster_Bike1780]

What size of motor are you gunning be running? If running like a 150 I'd run a bigger mm pipe rather than a 26 mm. I'm running a 38mm pipe on my 150 and it has that nice crf rumble to it.

[K-Pac]

What size of motor are you gunning be running? If running like a 150 I'd run a bigger mm pipe rather than a 26 mm. I'm running a 38mm pipe on my 150 and it has that nice crf rumble to it.

Running a 140cc. I don't have the tools to cut and weld an exhaust so it would have to be bolt on.

[Blitz$M.Inc.$]

it looks close anyway
you may have to mod it still
find the angle you need to alter, cut on that line, cut and shape a sleeve to go around the cut
spin and clamp as you need
i eventually welded mine but thats how i found the angle

[K-Pac]

it looks close anyway
you may have to mod it still
find the angle you need to alter, cut on that line, cut and shape a sleeve to go around the cut
spin and clamp as you need
i eventually welded mine but thats how i found the angle

Hopefully it doesn't come to that, as I dont have the tools to do that. I'm going to order it, see what happens.